X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Sender: To: lml@lancaironline.net Date: Fri, 21 Mar 2014 08:07:10 -0400 Message-ID: X-Original-Return-Path: Received: from col0-omc3-s8.col0.hotmail.com ([65.55.34.146] verified) by logan.com (CommuniGate Pro SMTP 6.0.9e) with ESMTP id 6789849 for lml@lancaironline.net; Fri, 21 Mar 2014 05:03:26 -0400 Received-SPF: pass receiver=logan.com; client-ip=65.55.34.146; envelope-from=peterpawaviation@hotmail.com Received: from COL129-W33 ([65.55.34.137]) by col0-omc3-s8.col0.hotmail.com with Microsoft SMTPSVC(6.0.3790.4675); Fri, 21 Mar 2014 02:02:51 -0700 X-TMN: [+wAGqmVTXmvezV9wtoYf+S8tfAwh9ODK] X-Originating-Email: [peterpawaviation@hotmail.com] X-Original-Message-ID: X-Original-Return-Path: peterpawaviation@hotmail.com Content-Type: multipart/alternative; boundary="_fa0b2502-4b9c-418a-9820-d08413785d78_" From: PETER WILLIAMS X-Original-To: Lancair Mailing List Subject: RE: [LML] Need to move front seats aft on a IV-P X-Original-Date: Fri, 21 Mar 2014 05:02:50 -0400 Importance: Normal In-Reply-To: References: MIME-Version: 1.0 X-OriginalArrivalTime: 21 Mar 2014 09:02:51.0037 (UTC) FILETIME=[566ED4D0:01CF44E4] --_fa0b2502-4b9c-418a-9820-d08413785d78_ Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable dave remove the seat and see how it is attached. some seats were attached only to the spar=3B but the kits called for a cant= ilever to the rear. you may not have the cantilever=3B although=2C if i remember correctly=2C t= he previous user=2C was over six feet tall. possible: 1. increase cantilever 2. move seat rail attachments 3. thinner seat cushions (use temprafoam) good luck how did you make out with the fuel pump issue? peter To: lml@lancaironline.net Date: Thu=2C 20 Mar 2014 07:54:09 -0400 From: skinner3410@sbcglobal.net Subject: [LML] Need to move front seats aft on a IV-P Has anyone with a IV-P found a good way to move the front seats aft about 3= -4 inches? I don't need the rear seat leg room=2C but I could use more in = the front. Moving the rails rearward would cantilever them quite a ways be= hind the spar box. I haven't figured out how I would support the rear ends= of the rails.=0A= =0A= Dave Skinner=0A= 845CM = --_fa0b2502-4b9c-418a-9820-d08413785d78_ Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
dave

remove the seat and = see how it is attached.

some seats were attached only to the spar=3B= but the kits called for a cantilever to the rear.
you may not have the = cantilever=3B although=2C if i remember correctly=2C the previous user=2C w= as over six feet tall.

possible:

1. increase cantilever
2.= move seat rail attachments
3. thinner seat cushions (use temprafoam)
good luck

how did you make out with the fuel pump issue?
peter


To: lml@lancaironline.netDate: Thu=2C 20 Mar 2014 07:54:09 -0400
From: skinner3410@sbcglobal.net=
Subject: [LML] Need to move front seats aft on a IV-P

Has anyone with a IV-P found a good way to move the front s= eats aft about 3-4 inches? =3B I don't need the rear seat leg room=2C b= ut I could use more in the front. =3B Moving the rails rearward would c= antilever them quite a ways behind the spar box. =3B I haven't figured = out how I would support the rear ends of the rails.
=0A=
 =3B<= /div>=0A=
Dave Skinner
=0A=
845CM
= --_fa0b2502-4b9c-418a-9820-d08413785d78_--