X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Sender: To: lml@lancaironline.net Date: Wed, 22 Jan 2014 14:03:04 -0500 Message-ID: X-Original-Return-Path: Received: from relay-hub205.domainlocalhost.com ([74.115.204.41] verified) by logan.com (CommuniGate Pro SMTP 6.0.8) with ESMTPS id 6697846 for lml@lancaironline.net; Wed, 22 Jan 2014 10:20:22 -0500 Received-SPF: none receiver=logan.com; client-ip=74.115.204.41; envelope-from=steve@oasissolutions.com Received: from MBX247.domain.local ([169.254.7.20]) by HUB205.domain.local ([192.168.68.49]) with mapi id 14.03.0158.001; Wed, 22 Jan 2014 10:19:46 -0500 From: Steve Richard X-Original-To: Lancair Mailing List Subject: RE: [LML] Re: Lancair IV-P control locks Thread-Topic: [LML] Re: Lancair IV-P control locks Thread-Index: AQHPF3MTeNKwAJJWoEKKKENtv6SKyJqQ2926 X-Original-Date: Wed, 22 Jan 2014 15:19:46 +0000 X-Original-Message-ID: References: In-Reply-To: Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: Content-Type: multipart/alternative; boundary="_000_rprvhnx4eu5sxu3s884a5wmf1390403981713emailandroidcom_" MIME-Version: 1.0 --_000_rprvhnx4eu5sxu3s884a5wmf1390403981713emailandroidcom_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable The top of my rudder is beyond my reach and I am 6'. How do you get it ins= talled? Steve Richard -------- Original message -------- From: Todd Long Date:01/22/2014 5:08 AM (GMT-08:00) To: lml@lancaironline.net Subject: [LML] Re: Lancair IV-P control locks I have three of the air gizmos control locks. One for the Rudderone for the= elevator one for the ailerons. Don't take very long to put on an hold very= very very well. Sent from my iPhone On Jan 21, 2014, at 14:04, > wrot= e: Posted for Steve Richard >: > See attached. Not the most elegant, but it works......so far. Any metho= d >that focuses on the rudders pedals uses the rudder cable system to take th= e >hit from gusts. Not always good. A better system would lock it in the re= ar >at the hinge, but I could not figure out how to do it without creating oth= er >problems. I too tried clamps at the top of the rudder, but I needed to ca= rry >a step to install/uninstall. Plus anything slipped in between the rudder = and >vertical stab at the counter weight always scuffed the paint. > > Steve > >From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of Geo= rge >Rosel > Sent: Tuesday, January 21, 2014 11:04 AM > To: lml@lancaironline.net > Subject: [LML] Lancair IV-P control locks > > Hello Gang, > > Does anyone have a good idea on how the best way to lock the rudder contr= ol >without a clamp at the top of the rudder? Just not convenient putting a cl= amp >up there!!?? > > Suggestions and pictures would be great. > > Thanks, > > ... George (Lancair 4P-T owner, N193CG) > > > George F. Rosel > also... > "The Lodge at Timberline", Copper Mtn., Colorado ... a true "ski-in/ski-o= ut" >Luxury Home for RENT > ... Click here to view my webpage: http://www.vrbo.com/254739 or... > http://www.LodgeAtTimberline.com -- For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html --_000_rprvhnx4eu5sxu3s884a5wmf1390403981713emailandroidcom_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable
The top of my rudder is beyond my reach and I am 6'.  How do you = get it installed?


Steve Richard

-------- Original message --------
From: Todd Long
Date:01/22/2014 5:08 AM (GMT-08:00)
To: lml@lancaironline.net
Subject: [LML] Re: Lancair IV-P control locks

I have three of the air gizmos control locks. One for the Rudderone fo= r the elevator one for the ailerons. Don't take very long to put on an hold= very very very well.

Sent from my iPhone

On Jan 21, 2014, at 14:04, <marv@lan= cair.net> wrote:




Posted for Steve Richard <st= eve@oasissolutions.com>:

> See attached.  Not the most elegant, but it works......so fa= r.  Any method
>that focuses on the rudders pedals uses the rudder cable system to take= the
>hit from gusts.  Not always good.  A better system = would lock it in the rear
>at the hinge, but I could not figure out how to do it without creating = other
>problems.  I too tried clamps at the top of the rudder, but I= needed to carry
>a step to install/uninstall.  Plus anything slipped in betwee= n the rudder and
>vertical stab at the counter weight always scuffed the paint.
>
> Steve
>
>From: Lancair Mailing List [ma= ilto:lml@lancaironline.net] On Behalf Of George
>Rosel
> Sent: Tuesday, January 21, 2014 11:04 AM
> To: lml@lancaironline.net=
> Subject: [LML] Lancair IV-P control locks
>
> Hello Gang,
>
> Does anyone have a good idea on how the best way to lock the rudder co= ntrol
>without a clamp at the top of the rudder? Just not convenient putting a= clamp
>up there!!??
>
> Suggestions and pictures would be great.
>
> Thanks,
>
> ... George (Lancair 4P-T owner, N193CG)
>
>
> George F. Rosel
> also...
> "The Lodge at Timberline", Copper Mtn., Colorado ... a true = "ski-in/ski-out"
>Luxury Home for RENT
> ... Click here to view my webpage: http://www.vrbo.com/254739   or...
> http://www.LodgeAtTimberline.com<http://www.lodgeattimbe= rline.com/>

<SR_pics-010.jpg>
<SR_pics-020.jpg>
<SR_pics-030.jpg>
<SR_pics-040.jpg>
--_000_rprvhnx4eu5sxu3s884a5wmf1390403981713emailandroidcom_--