lml@lancaironline.net Mailing List Archive

What happens to any “stuff” (pebbles, dirt, etc) that is kicked up by the prop and sitting in the intake hole when you go from filtered (blocking the dirt) to unfiltered? What keeps it from now getting sucked in?

Matt

From: Christian Meier <lancair@meier.cc>
Reply-To: Lancair List <lml@lancaironline.net>
Date: Friday, January 17, 2014 at 1:17 AM
To: Lancair List <lml@lancaironline.net>
Subject: [LML] Re: LNC2 airfilters

George,

I'm using a Rod Bower Filter since 120h now. The systems works very well.

I used to start with an older design and upgraded to a bigger flapper valve and

bigger holes for filtered air intake. The pictures are made before the upgrade.

I actually use a Lycoming IO-390. The aluminum intake ring in the cowling is also

available from Rod.

The difference from filtered to ram air is about 1.2" in cruise and you really feel

a difference when you open the valve.

There is some very fine dirt sticking on the inside of the fuel meter intake from the

unfiltered ramair use. But I don't think this will harm the engine...

When the valve is closed the engine will get warm filtered air from inside the cowling.

As soon as I'm airborn I open the ramair valve.

I'm happy with the system!

Christian

Am 16.01.2014 um 17:59 schrieb marv@lancair.net:

Posted for George catalano <george@contessastone.com>:

> Is anyone out there using the Rod Bower arrangement for their air filter
>system/ram air system? Seems like a fairly elegant looking solution but also
>expensive.
> http://www.ramairforhomebuilts.com/ramair.html
>
> LNC2 115 hours