<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
                                    Hi guys first of all thank you to all of
you who responded to our questions a couple of weeks back . We were able to
sort it out by lowering the front end of the flap roller bracket by 3/16 of
an inch . Then rewelding the arms back to the attach plate in this new
position . With this done no problems . Now we have a new question , While
doing the final rigging of the flaps in the full up position they are in
alignment but when they are full down the left hand flap is 2 1/2 to 3
degrees different to the right . Our new question is this going to cause a
problem in flight  ( eg barrel rolls ) or are we worried over nothing ?
Response from people who built and are flying their IV-Ps would be
appreciated .

                                            Regards Robert Wallace
                        Yarrawonga Lancair Syndicate

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>