|
I stand corrected. I will also correct
my chart and repost.
Barry Knotts
LIV-P, N4XE
On 4/2/2013 4:02 PM, Walter Atkinson wrote:
The LOP HP
multiplier for the TSIO 550 is 13.75.
FF * 13.75 = HP
On Apr 2, 2013, at 8:13 AM, F. Barry Knotts wrote:
Bob,
Here's the chart that I have. It's divided into the upper
portion: Rich of Peak, and the lower portion: Lean of
Peak. The 3 parts of the LOP are based entirely on what
you believe the correct hp/gal/hr. is for your engine.
(Horsepower being wholly dependent on fuel flow when
LOP.) I believe the 13.5 hp/gal/hr is what GAMI reports.
Your results may vary....
Barry Knotts
LIV-P, N4XE
On 4/1/2013 3:02 PM, Robert R Pastusek wrote:
Gentlemen,
I recently copied a
power settings chart from the LML for the TSIO-550
and saved it “somewhere” on my hard drive…which is
not so “hard and fast” any
more. Unfortunately, when Bruce Ryan asked me for
same, I was unable to find/reproduce.
If you have one of
these, could you please forward again.
Many thanks in advance!
Bob
<Power Settings.xlsx>--
For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html
|