|
Colyn, I think what I have is:
7.3:1 CR = 13.53
8.5:1 CR = 13.73
Is that correct? (Actually, the 13.53 and 13.73 are what the
factors are in the table, although they are not fully displayed.)
Barry
On 4/3/2013 12:05 AM, Colyn Case wrote:
Thanks
Walter.
Begin forwarded message:
Date: April 2,
2013 10:28:42 PM EDT
Subject: Re:
[LML] TSIO-550 Power Settings Chart
Colyn:
To be more accurate…
7.5:1 CR = 13.73
7.3:1 CR = 13.53
On Apr 2, 2013, at 6:15 PM, Colyn Case wrote:
Hi
Walter,
That's for the 7.5:1 (or is it 7.3:1) pistons?
Colyn
On Apr 2, 2013, at 4:02 PM, Walter Atkinson
wrote:
The LOP HP multiplier for
the TSIO 550 is 13.75.
FF * 13.75 = HP
On Apr 2, 2013, at 8:13 AM, F. Barry
Knotts wrote:
Bob,
Here's the chart that I have. It's
divided into the upper portion: Rich of
Peak, and the lower portion: Lean of
Peak. The 3 parts of the LOP are based
entirely on what you believe the correct
hp/gal/hr. is for your engine.
(Horsepower being wholly dependent on
fuel flow when LOP.) I believe the 13.5
hp/gal/hr is what GAMI reports. Your
results may vary....
Barry Knotts
LIV-P, N4XE
On 4/1/2013 3:02 PM, Robert R Pastusek
wrote:
Gentlemen,
I
recently copied a power settings
chart from the LML for the
TSIO-550 and saved it “somewhere”
on my hard drive…which is not so
“hard and fast” any more.
Unfortunately, when Bruce Ryan
asked me for same, I was unable
to find/reproduce.
If
you have one of these, could you
please forward again.
Many thanks in advance!
Bob
<Power Settings.xlsx>--
For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html
|