Mailing List lml@lancaironline.net Message #65176
From: Steve Colwell <mcmess1919@yahoo.com>
Sender: <marv@lancaironline.net>
Subject: HID upgrade to Legacy
Date: Wed, 03 Apr 2013 17:43:21 -0400
To: <lml@lancaironline.net>
Paul,

We allow a minute or so warm up before pulsing.  The first bulbs were used
and went about 200 hours at the faster pulse rate operating 50% of flight
time (when traffic is a concern).  There is some controversy about color
temperature recognition by the eye so I am running one 5000K and one 8000K
pulsing at the slower rate which gives longer duration.  Bottom line, I
think HID is more noticeable to oncoming traffic than strobes.  The Audi
projector lens may be a factor also.  I picked the Audi projector because it
allowed a 2 3/8" wide outer lens as shown in the photo with no reduction in
beam width which is still as wide as automobile headlights.

Steve Colwell  Legacy


Subject: [LML] Re: HID upgrade to Legacy

Steve, ebay has a few cheap Pulselites, I may pick one up.  Do you warm the
HID first then pulse?   My lamps kick on immediately but they take 5 seconds
to really come up to temperature and full brightness.  I don't think pulsing
immediately will fire the HID although these ballasts allow refire so it
might work.

Paul
On 2013-04-02, at 8:05 PM, "Steve Colwell" <mcmess1919@yahoo.com> wrote:

> The price of HID has dropped significantly since I bought used Audi
> parts on eBay.  Here is a sample on eBay of two new assemblies for
> $29.98 with your choice of color temperature.

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster