|
|
Thanks Walter.
Begin forwarded message: Date: April 2, 2013 10:28:42 PM EDT
Subject: Re: [LML] TSIO-550 Power Settings Chart
Colyn:
To be more accurate…
7.5:1 CR = 13.73 7.3:1 CR = 13.53
On Apr 2, 2013, at 6:15 PM, Colyn Case wrote: Hi Walter,
That's for the 7.5:1 (or is it 7.3:1) pistons?
Colyn On Apr 2, 2013, at 4:02 PM, Walter Atkinson wrote: The LOP HP multiplier for the TSIO 550 is 13.75.
FF * 13.75 = HP On Apr 2, 2013, at 8:13 AM, F. Barry Knotts wrote:
Bob,
Here's the chart that I have. It's divided into the upper
portion: Rich of Peak, and the lower portion: Lean of Peak. The 3
parts of the LOP are based entirely on what you believe the
correct hp/gal/hr. is for your engine. (Horsepower being wholly
dependent on fuel flow when LOP.) I believe the 13.5 hp/gal/hr is
what GAMI reports. Your results may vary....
Barry Knotts
LIV-P, N4XE
On 4/1/2013 3:02 PM, Robert R Pastusek wrote:
Gentlemen, I recently copied a power
settings chart from the LML for the TSIO-550 and saved it
“somewhere” on my hard drive…which is not so “hard and fast” any more.
Unfortunately, when Bruce Ryan asked me for same, I was
unable to find/reproduce.
If you have one of these,
could you please forward again.
Many thanks in advance!
Bob
<Power Settings.xlsx>-- For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html
|
|