The circuit breaker on the bulkhead in my plane is easily reached when
going through the runup checklist before takeoff as well as reaching it while in
flight.
Gary
LNC2
----- Original Message -----
Sent: Tuesday, April 2, 2013 7:13
AM
Subject: [LML] Re: Hydraulic gear pump
failure - Relays
The CB needs to be where you can reach it in flight and not on
the bulkhead. I had a relay failure where it welded itself on. The only way to
stop the pump from running and overheating and the cockpit filling with smoke
was to pull the CB which was with in
reach.
Rusty