X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Sender: To: lml@lancaironline.net Date: Sat, 30 Mar 2013 10:15:17 -0400 Message-ID: X-Original-Return-Path: Received: from mail-qc0-f171.google.com ([209.85.216.171] verified) by logan.com (CommuniGate Pro SMTP 6.0.4) with ESMTPS id 6171711 for lml@lancaironline.net; Fri, 29 Mar 2013 22:23:41 -0400 Received-SPF: pass receiver=logan.com; client-ip=209.85.216.171; envelope-from=dballin@gmail.com Received: by mail-qc0-f171.google.com with SMTP id q2so418311qch.16 for ; Fri, 29 Mar 2013 19:23:05 -0700 (PDT) X-Received: by 10.49.87.40 with SMTP id u8mr6148612qez.62.1364610185303; Fri, 29 Mar 2013 19:23:05 -0700 (PDT) MIME-Version: 1.0 Received: by 10.49.59.14 with HTTP; Fri, 29 Mar 2013 19:22:45 -0700 (PDT) Reply-To: dballin@gmail.com In-Reply-To: References: From: Dan Ballin X-Original-Date: Fri, 29 Mar 2013 19:22:45 -0700 X-Original-Message-ID: Subject: Re: [LML] Re: Elevator trim control X-Original-To: Lancair Mailing List Content-Type: text/plain; charset=ISO-8859-1 I installed the safety trim system - just for pitch, but you could do it for all 3 axes if wanted. You can use a micro switch on the flaps or a speed switch to have a "fast" setting and a "slow" one. Has some other nice features to prevent runaway trim and you don't need to use those pesky ray allen relays http://www.tcwtech.com/Safety-Trim%20Page.htm I had another system that never worked, but this is easy to install and works as advertized. Dan Ballin LEG2 N386DM