Sender: <marv@lancaironline.net>
To:  lml@lancaironline.net
Date: Tue, 19 Feb 2013 18:56:49 -0500
Message-ID: <redirect-6072856@logan.com>
Received-SPF: none
 receiver=logan.com; client-ip=98.136.217.94; envelope-from=mattinlosangeles@yahoo.com
References: <list-6072704@logan.com>
Mime-Version: 1.0 (1.0)
In-Reply-To: <list-6072704@logan.com>
Content-Type: text/plain;
	charset=utf-8
Content-Transfer-Encoding: quoted-printable
From: Matt <mattinlosangeles@yahoo.com>
Subject: Re: [LML] Re: 360 Rudder trim

My 360 has just one piece of white duct tape. It does not have the additiona=
l pieces over it and it has not fallen off yet. 5 years and still working.=20=


Matt

Sent from my iPhone

On Feb 19, 2013, at 1:45 PM, "Greenbacks, UnLtd." <N4ZQ@VERIZON.NET> wrote:

> Once again duct tape rides to the rescue.
> This tab is 4"x1 1/8"x.032 Al and with an 8=C2=BA bend.
> I didn't get around to scanning the ball for a bit but back up at 200kts t=
here was obvious improvement.
> Ball centered with no help from my left foot. If I had white duct tape I'd=
 be tempted to 'set it and forget it' as my carpenter would say.
> But I'll round the corners, polish, and try the silicone approach.
> Scott's internal rudder trim is certainly more elegant, but I'm out of the=
 building and into the flying mode!
> At least until I get back to my shop and my half built chopper starts to w=
ink at me.
>=20
> Angier Ames
> N4ZQ
> 9.2hrs and counting...
>=20
>=20
>=20
> <IMG_0354.jpg>
>=20
>=20
>=20
>=20
> <IMG_0355.jpg>
>=20
>=20
>=20
>=20
> <IMG_0356.jpg>
>=20
>=20
>=20
>=20
> --
> For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.htm=
l