Uh, woops. Not an injector. Guess I should have read the subject line. If the EGT didn't move, it's not an injector.
On Aug 27, 2012, at 7:03 AM, Lancair wrote: No change to EGTs. Robert uh, What happened to EGTs? 2. induction air problem? Last week I had been cruising LoP and during the power back for landing Cyl #3 suddenly jumped 125F and sent the Chelton lady shouting into my ear. That would not be unusual if I had failed to either further lean or go full rich but in this case I had leaned and the other 5 cylinders were OK. I leaned way back and really lost power and then went full rich, and it finally settled down. On the return flight I reduced power and carefully kept leaning and had no problem. Yesterday it was deja' vu all over again. Powered back on approach and only #3 went nutso until I leaned even more. On the return flight there was no recurrence.
Does this sound like a problem with the injector, with the thermocouple, or ? ? ?
Robert Simon ES-P N301ES (TSIO550)
-- For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html
<Robert Simon.vcf>-- For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html
|