Jack,

with my AeroComposites prop and a McCauley hub the high speed setting is adjustable but the low speed just stops at hard stops on the hub and is not adjustable. I had my low pitch changed from 9° to 10°. My high pitch can not be adjusted.

Lorn

> From: J H Webb <airmale4@yahoo.com>
> Date: May 31, 2012 8:06:57 AM EDT
>
> Steve,
>
>    Your high pitch blade angle is set too low(too small a bite at the high pitch stop). To change it you need a visit to a prop shop but it is a somewhat minor repair.
>
> Jack Webb
> L360 LIV
> Years as Engineering Flight Test Pilot
>
>> From: steve <n5276j@aol.com>
>> Sent: Tuesday, May 29, 2012 11:09 AM
>>
>> Hi All.
>>  
>> Got a question for  360 flyers with over 200HP and the Hartzell prop with 68" blades.  I need to know if you guys with the higher HP can bring your RPM's down to say 2000 or so while running full throttle at alitude of 12,000 to 17,500.  I have to pull back power in order to bring the rpms down at alitude of 12,000 +.
>>  
>> steve alderman   360


--
Lorn H. 'Feathers' Olsen, MAA, ASMEL, ASES, Comm, Inst
DynaComm, Corp., 248-345-0500, mailto:lorn@dynacomm.us
LNC2, FB90/92, O-320-D1F, 1,800 hrs, N31161, Y47, SE Michigan