Sender: <marv@lancaironline.net>
To:  lml@lancaironline.net
Date: Thu, 31 May 2012 14:41:08 -0400
Message-ID: <redirect-5571128@logan.com>
Received-SPF: pass
 receiver=logan.com; client-ip=216.119.134.2; envelope-from=lorn@dynacomm.us
From: Lorn H Olsen <lorn@dynacomm.us>
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: quoted-printable
Subject: Re: hartzell 68" props for 360 with 200+HP
Mime-Version: 1.0 (Apple Message framework v1278)

Jack,

with my AeroComposites prop and a McCauley hub the high speed setting is =
adjustable but the low speed just stops at hard stops on the hub and is =
not adjustable. I had my low pitch changed from 9=B0 to 10=B0. My high =
pitch can not be adjusted.

Lorn

> From: J H Webb <airmale4@yahoo.com>
> Date: May 31, 2012 8:06:57 AM EDT
>=20
> Steve,
>=20
>    Your high pitch blade angle is set too low(too small a bite at the =
high pitch stop). To change it you need a visit to a prop shop but it is =
a somewhat minor repair.
>=20
> Jack Webb
> L360 LIV
> Years as Engineering Flight Test Pilot
>=20
>> From: steve <n5276j@aol.com>
>> Sent: Tuesday, May 29, 2012 11:09 AM
>>=20
>> Hi All.=20
>> =20
>> Got a question for  360 flyers with over 200HP and the Hartzell prop =
with 68" blades.  I need to know if you guys with the higher HP can =
bring your RPM's down to say 2000 or so while running full throttle at =
alitude of 12,000 to 17,500.  I have to pull back power in order to =
bring the rpms down at alitude of 12,000 +.=20
>> =20
>> steve alderman   360


--
Lorn H. 'Feathers' Olsen, MAA, ASMEL, ASES, Comm, Inst
DynaComm, Corp., 248-345-0500, mailto:lorn@dynacomm.us
LNC2, FB90/92, O-320-D1F, 1,800 hrs, N31161, Y47, SE Michigan