Read the camguard report at their website.    Camguard is a lobo sponsor btw

Sent from my iPhone

On Mar 22, 2012, at 1:25 PM, jeffrey liegner <liegner@ptd.net> wrote:

>
>
> I wouldn't be nervous.  I just wish someone explained to me that this was the future cost built into (what seemed to be) an expensive new engine; a delayed expense prudently detectable with annual inspections, that will be incurred over time.
>
> My plan: The oil venting with open filler seems sensible.  A dehumidifier inside the hanger. Perhaps a crankcase dehumidifier or dessicant system.  I wonder if I should change oils from Exxon Elite to a pure mineral oil?
>
> Jeff L
>
>
>
>
> LML Gang,
>
> Several of your posts have me nervous about this IV-P that I’m building.  Many times, we hear postings about the people having troubles but don’t hear the good stories.  I appreciate Michael piping in about his better luck with the TSIO-550.
>
> Any more of you out there getting good life out of your TSIO-550 engines?
>
> Thanks!
>
> Dan Olsen
> Fort Collins, CO
>
>
> <http://lancaironline.net/lists/lml/Message/61119-H.txt>
>
> <http://lancaironline.net/lists/lml/Message/61119-P.txt>
> I have just over 1100TT on my factory new TSIO 550B- two cylinders hovering at 60 and the rest in the mid 60s. Just put 12 hours on it last week (LOP 16.5 GPH 28 inch by 2370RPM) and burned barely a quart and it runs smoother and smoother year by year. Most flying FL190-230. Hoping to get another couple hundred before topping it.
> Michael Smith
>
>
> --
> For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html