Mailing List lml@lancaironline.net Message #59645
From: Ken <kkellner1@new.rr.com>
Sender: <marv@lancaironline.net>
Subject: Re: [LML] Re: Dragger for 4P
Date: Thu, 08 Sep 2011 02:09:07 -0400
To: <lml@lancaironline.net>
Hamid,

It does work, but steering is tricky while pushing.  If you have room in the hangar it works well to pull the airplane into the hanger with the tractor (up hill) and push it out by hand (down hill).  A longer tow bar might improve the steering sensitivity, but I have not tried that yet.

Ken Kellner
IVP  14LK
----- Original Message ----- From: "Hamid Wasti" <hwasti@lm50.com>
To: <lml@lancaironline.net>
Sent: Monday, September 05, 2011 10:43 PM
Subject: Re: [LML] Re: Dragger for 4P


DISCLAIMER: This is just an idea, I have NOT personally tried this.

Most of the products like Dragger/Aero-Tow etc run for over $1K, some close to $2K. Yesterday at Sears I saw customer-return/refurbished "Lawn Tractors" for under $700 and new ones for about $900. Other sources likely have similar prices.

You can buy one of these, remove the mower deck and do a little engineering to attach a tow bar and now you have a tug with a 15+ HP engine and electric start. You may be able to recoup some of your initial cost by selling the removed mower deck on eBay or Craig's List.

Regards,

Hamid

Ronald STEVENS wrote:
I am using the Aero-Tow. I bought it for my old cirrus, but I could adapt it for the 4p. It is 5 year old and still works perfectly.
It works really great and would recommend this.

== Ronald
On Sep 4, 2011, at 8:18 PM, Bob Rickard wrote:


Fellas,

I have the new dragger from Dragger.com and I don't like it.  Do you guys like anything else for a 4P?

Bob R.


--
For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html




--
For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html





Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster