|
I would like more info on
this, before ordering...Perhaps a photo with instructions, cost and how
heavy is it...
Michael
n66mg@aol.com
In a message dated 9/2/2011 4:51:57 A.M. Pacific Daylight Time,
colyncase@earthlink.net writes:
Matt,
Sounds interesting. do you have a schematic for this? I
would just want to understand the failure modes before I ordered one.
Colyn Case
On Sep 1, 2011, at 1:27 PM, Matthew Collier wrote:
Mr. Paczkowski, We have installed an emergency
blow down accumulator in almost all of our customers IV's. They aren't light
but are a much easier and faster way to get the gear down. When retrofitted
to a flying IV we typically install the piston accumulator on the back of
the spar box. Then we use two stainless steel ball valves mounted between
the seats to operate the system, one on the forward spar box flange and the
other on the aft. The forward valve releases the pressure holding the gear
in the up position. The aft valve releases the fluid pressurized in the
piston accumulator to the emergency side of the shuttle valve. When the
valves are shut and the system is recharged in the down position the shuttle
valve returns to its normal position and the accumulator will recharge
during the next gear up cycle. We have had great success with this system
and our customers even practice emergency blow downs in flight since it is
completely reset each time without servicing.
Matthew Fibercraft
Inc.
On Wed, Aug 31, 2011 at 4:42 AM, Nicholas Paczkowski
<npaczkowski@telus.net>
wrote:
Perhaps a dumb question (apologies in advance) but Is
there a better alternative available to the manually operated hydraulic
'gear down' lever (such as a charged gas bottle) that would eliminate both
the awkward lever and the seemingly inevitable leaking of hydraulic fluid?
Thanks.
= |
|