Sender: <marv@lancaironline.net>
To:  lml@lancaironline.net
Date: Fri, 10 Jun 2011 09:01:32 -0400
Message-ID: <redirect-5016366@logan.com>
Received-SPF: pass
 receiver=logan.com; client-ip=209.85.212.52; envelope-from=dave.saylor.aircrafters@gmail.com
DomainKey-Signature: a=rsa-sha1; c=nofws;
        d=gmail.com; s=gamma;
        h=mime-version:in-reply-to:references:from:date:message-id:subject:to
         :content-type:content-transfer-encoding;
        b=chV8PAoR8b0H6FELvEYAv3RuEeQDDR988QAqZd4KBh6bDjK3EN7qiCcS4sLQz0PmtG
         YGP2cd2LPYrUhFFxYgbWc7Z/1KoLmAldp09pRN5Uf06jIID4IANCdjKXY7LKVF2fvM4/
         gRkztKtQDLkxQZ9xlYJUpIkCbLMi68JGPmDqI=
MIME-Version: 1.0
In-Reply-To: <list-5015520@logan.com>
References: <list-5015520@logan.com>
From: Dave Saylor <dave.saylor.aircrafters@gmail.com>
Subject: Re: [LML] Re: hot start procedures?
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: quoted-printable

One of the best aids to hot starting is to add a SlickStart module.
The hotter spark helps whatever method you decide to use.

Dave Saylor
AirCrafters
140 Aviation Way
Watsonville, CA 95076
831-722-9141 Shop
831-750-0284 Cell


On Thu, Jun 9, 2011 at 11:13 AM,  <N66mg@aol.com> wrote:
> All this talking about the Chevy Corvette LS V8 engine that has been
> converted for the Lancair IV-P, I have one but decided to go with the
> Continetal IO-550...If anyone is interested in purchasing this engine ple=
ase
> call me
> Michael Giardino
> American Research Products
> Office 310 541-1512
> Fax 310-377-9821
> Cell 310-678-4068
> L-IV=C2=A0 n7sz=C2=A0 95%
>
>
> In a message dated 6/8/2011 5:25:54 A.M. Pacific Daylight Time,
> liegner@earthlink.net writes:
>
> lml@lancaironline.net
> John Hafen <j.hafen@comcast.net>
>
> I was told once by Ron G during recurrency training how they start the ho=
t
> engines at OSH and SnF during the demo rides.=C2=A0 All knobs (throttle, =
prop,
> mixture) full in, touch the fuel primer briefly to register a small squir=
t
> on the fuel flow guage (emphasis on briefly), and crank the starter. Engi=
ne
> will start and pull back on throttle to adjust.=C2=A0 Option to temporari=
ly pull
> back a bit on mixture (titrate to starting) to help further lean the
> injection.
>
> I use this at the pumps, on hot days during restarts and anytime the temp=
s
> are ridiculous.=C2=A0 It seems to work as advised.
>
> Jeff L
> LIVP
>
>
>
> Gents:
>
> What have you found to be the best hot start procedure for a TSIO 550, wi=
th
> mags, in an IVP?=C2=A0 I'm not talking immediately after engine shut down=
, but
> shut down on a hot tarmac after 30 to 40 minutes so the fuel lines are ni=
ce
> and hot and boiling the internal fuel.
>
> Thanks,
>
> John
> IVP 413AJ
>
>
> --
> For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.ht=
ml
>
>