Mailing List lml@lancaironline.net Message #58149
From: <larry.eversmeyer@faa.gov>
Sender: <marv@lancaironline.net>
Subject: Re: [LML] Rudder Cables
Date: Wed, 27 Apr 2011 15:23:10 -0400
To: <lml@lancaironline.net>
 Message Header

Undecoded Message

Thanks for the help folks. Mr Cargill is installing these on has project and put me in contact with the individual that had them custom made.

Again thanks to all

LarryE


From: Larry Eversmeyer/AMC/FAA@FAA
To: lml@lancaironline.net
Date: 04/26/2011 07:02 AM
Subject: [LML] Rudder Cables
Sent by: "Lancair Mailing List" <lml@lancaironline.net>





I remember there was a post in the past that showed a clevis looking device that one end attached to the eye bolt on the firewall and the other end attached to the rudder cable.  It appeared that as the cables stretched or you didn't get them drawn tight enough you could use this clevis which had adjustment bolts on it to compensate for the slack.

Does anyone know where I can purchase these items and what they are called?

Larry Eversmeyer
still building

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster