Mailing List lml@lancaironline.net Message #57271
From: Wolfgang <Wolfgang@MiCom.net>
Sender: <marv@lancaironline.net>
Subject: Re: [LML] Re: Lithium Batteries
Date: Sat, 22 Jan 2011 07:32:27 -0500
To: <lml@lancaironline.net>
You are right about balancing and it's details . . . . but the details of battery types being tossed around on the list are all to vague.

LiPo - Lithium Polymer - this describes a Lithium battery and it's mechanical construction, a polymer sheet separator used as a stage for the chemical reaction. This can described Lithium Graphite, Lithium Carbon, Lithium Manganese or Lithium Iron (LiFe), all of which can also be called Lithium Ion batteries.

LiFe - Specifically describes a Lithium Iron battery, usually constructed with a Polymer sheet separator.

The attachments will provide more details.

Wolfgang



----- Original Message ----- From: "Hamid Wasti" <hwasti@lm50.com>
To: <lml@lancaironline.net>
Sent: Friday, January 21, 2011 11:35 AM
Subject: Re: [LML] Re: Lithium Batteries


Michael McMahon wrote:

I do not want to start an argument,  but it is frustrating for people to say they don't like ideas based on out-of-date or incomplete data.

It is even more frustrating when people proposed ideas based on
incomplete data. Your "EV guru" friends are correct, you do not HAVE to
cell balance a pack, but only as long as you are willing to live with
the limitations imposed by that choice. Do you know what those
limitations are?

When you have a number of cells of any chemistry in series in a battery
pack, they all receive exactly the same current when charging. Some
cells are a little more efficient than others so they get fully charged
before their colleagues in the string. If at that point they continue to
receive charging current, they will over-charge. Some chemistries are
able to handle this over-charging. Other chemistries like LiPo are very
intolerant of this over charging and quite literally blow up. Cell
balancing attempts to make sure that the charge on each of the cells in
the string is identical so they all get fully charged at the same time,
maximizing the charge that the pack can hold. That maximum number is the
one everyone throws around and that is the number you will expect to get
from your battery pack.

As I mentioned, you do not HAVE to cell balance. For a LiPo or LiFe
pack, you can just monitor the voltage on each individual cell and stop
charging when one of the cells gets fully charged. Over time, the
discrepancy in th charge state between the most efficient and the least
efficient cell in the string will keep increasing, with the usable
capacity of the entire pack being controlled by the charge in the least
efficient cell. Taking this to the theoretical extreme, at some point
the pack will not be able to deliver any energy because one cell will be
fully charged and another will be fully discharged. In real life, you
will declare the pack useless and stop using it before you get to that
point. If you are willing to live with this diminishing capacity, then
cell balancing is indeed not required. Just remember that your pack is
no longer going to have the same capacity as the pack that has cell
balancing and you must design the rest of your system to account for that.

Quoting the late Paul Harvey: Now you know the rest of the story.

Regards,

Hamid



Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster