| I have a mold for a 360 Glare shield. Its been used on 2 360's now, each with different panels and can be made to fit. I made it with 3 plys of bid with extra plies at the front lip and sides. Then the upholstery guy covered it with foam and shaped it and covered it with leather.
On Wed, Oct 13, 2010 at 7:18 PM, Bob Smiley <rsmiley2@centurytel.net> wrote:
Gary,
I have a 360 glare shield covered with ¼
inch foam and then covered with black leather. The leather is curved
around the front edge without a sewing seam and no wrinkles. It mounts
with only three screws and finishing washers. It looks very nice.
Do you want it?
Bob Smiley
360-297-0596 home/fax
360-731-0269 cell
Rsmiley2@centurytel.net
I have a whole 360 to part out. This
is item no 2. If you guys need anything let me know.
The glare shields
and the instrument panels disappeared from the parts list on the web site about
4 years ago, although the instrument panels make occasional reappearances.
At one of the LOBO seminars, I learned from another builder that it is possible
to cut up a Legacy glare shield to fit an 320/360. That’s what I
plan to do.
Gary Fitzgerald
LNC2 ~70%
Engine: TBD
St. Charles, MO
Just wondering if somone has a 320/360 glare shield/ dust
cover that they were willing to sell. If so , please let me know.
Thanks,
Guy Foreman
guyjill01@hotmail.com
219-477-5424
|