I don't have trim springs and do not have "very large stick forces". I have trim tabs, and trim to neutral, so stick forces are light at all speeds.
To: lml@lancaironline.net
Date: Wed, 29 Sep 2010 07:35:38 -0400
From: Wolfgang@MiCom.net
Subject: [LML] LNC2 center stick?
You will have very large stick forces. Those stick
forces are currently handled by trim springs.
If you have to input stick forces without trim
input, you may not be able to handle that condition.
Servo tabs can be the answer.
Wolfgang
|
|
|
Posted for "steve alderman"
<kr76j@comcast.net>:
Hi,
I'm new to
the lancair family. Bought an unfished kit this past winter or
should I say rescused one . Have worked almost everyday and close to
primer. I
have a big question for all. As a past high time KR2
builder-pilot ( Chased
Lance around in the 80's) I enjoyed the center
stick (in the console) and
think it would be a good space saving mod
in the Lancair. Has any one made
this mod? Any drawing ?
Pics
Thanks Steve Alderman lancair
360
|
|