|
Hi Chris,
How do you grease the bearings on the elevator and
rudder? Access to the bearings on my Legacy is too small to allow
much more than the nozzle on a can spray lubricant. Do you remove the
control surfaces to get access?
Thanks,
Dennis
I use bearing grease for 'exterior'
bearings==> those that are likely exposed to the elements or are subjected
to higher loads. This forms a better barrier to resist moisture
penetration etc. Any gap between bearing and race is filled with
grease.
For interior applications I use LPS2. ==> this spray
lubricant has less friction than grease.
Chris Zavatson
N91CZ
360std
|