|
|
Thanks Wolfgang. I’d just sent in a correction when yours came in.
Valin
From: Lancair Mailing
List [mailto:lml@lancaironline.net] On Behalf Of Wolfgang
Sent: Sunday, May 30, 2010 2:00 PM
To: lml@lancaironline.net
Subject: [LML] Re: Low Pressure Gear Switch Needed
You may want to check your numbers.
At 100 Knots you're only going to get about 1/4 psi
(0.5" Hg)
|
From:
|
"Valin & Allyson Thorn"
<thorn@starflight.aero>
|
|
Sender:
|
<marv@lancaironline.net>
|
|
Subject:
|
RE: [LML] Re: Low Pressure Gear Switch Needed
|
|
Date:
|
Sun, 30 May 2010 12:17:33 -0400
|
|
To:
|
lml@lancaironline.net
|
|
|
Bruce,
Thanks for the link to the pressure switches. I’m
looking at airspeed pressure switch options for possibly toggling in lower
trim tab servo speeds at higher air speeds. I did a quick spreadsheet
to see if the pressures for the switches at the link were in the needed
range. If I did the calculations right, it looks like the lowest
airspeed for the lowest pressure switch at that link (7.5-145 psi range) is
for 100 kts.
Tom,
|
image001.jpg
|
|