My
VM1000 has always been a bit of problem, but now the problems have increased
and I need to resolve them. Any thoughts on any of these issues?
I’ve been flying the 360 since 2001 and I put the date the problem started in
parentheses):
1.
Leaning
mode (never worked since day one). Pushing the button to go into the
leaning mode has never functioned. Just doesn’t do anything.
2.
Amps
(February 2010). I’ve noticed the amp-meter bouncing around. It
used to be fairly steady in the 18-20 amps range, but now it is more like 16
for a while, then bounces to 26 or something. It’s not related to
landing lights, radio com, fuel transfer pumps, or any evident change in
load. The alternator (B&C) is about 6 years old and the belt is,
according to the A&P, okay but could stand to be a bit tighter.
Voltage regulator is B&C too.
3.
AutoTrack
(March 2010). Just stopped working. Pushing the button for
AutoTrack now does nothing.
4.
Fuel
Remaining (May 2010). Unable to add fuel to the tank. I can cycle to the
“add fuel” point and then push buttons to add 10 gal units or 1 gal units –
both register as “to be added”. But then when I push the button to cycle
out of the “Add” mode it doesn’t register the “add”. So it always
indicates zero fuel now and I can’t add any!!! I’ve tried all sorts of
amounts but nothing will work. It’s been like this for 4 flights now…
this is the straw that broke the camels back. I need to get this fixed
now. NOTE: I do still have a header tank gauge and separate
totalizers on each wing. I am NOT flying without knowing my fuel
quantity… this is just another check.
Any
help would be appreciated, including tips on how to get in touch with
VM…
Thanks,
Matt