<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
Walter,

Your not crazy.

A couple of years ago Lancair changed the tabs on the torque tubes to the
down position.
I suppose some customers were complaining that the crossover tube was
interfering with
some of their instruments. Adjust the angle of the torque tubes to 10.5 or
11 degrees instead of the
10 degrees the manual calls for. My crossover tube is approximately 1" above
the top of the nose gear tunnel and above the bottom of the instrument
panel. It should workout OK.

Skip Long
Lancair IV N47SL
HWD
skiplong@videocomm.com


>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>