Return-Path: Received: from imo23.mx.aol.com ([152.163.225.67]) by ns1.olsusa.com (Post.Office MTA v3.5.3 release 223 ID# 0-64832U3500L350S0V35) with ESMTP id com for ; Mon, 8 May 2000 18:55:47 -0400 Received: from RWolf99@aol.com by imo23.mx.aol.com (mail_out_v26.7.) id k.e2.4255c2a (4331) for ; Mon, 8 May 2000 19:01:34 -0400 (EDT) From: RWolf99@aol.com Message-ID: Date: Mon, 8 May 2000 19:01:33 EDT Subject: Antenna Cable Routing To: lancair.list@olsusa.com X-Mailing-List: lancair.list@olsusa.com Mime-Version: 1.0 <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> I will have 5 antenna in my tailcone -- DME, Transponder, Nav, Com1 and Com 2. (One of the Coms will be in the vertical tail.) Can I just run all five RG-58 or RG-142 cables together thru the elevator pushrod tunnel, as in, all five cables clamped down with a single Adel clamp (or equivalent) at regular intervals? My assumption is that power fluctuations thru one cable do not induce signals in the adjacent cables -- this is the fundamental question. I do know that I should not have power cables, like hydraulic pump power cables or strobe light power cables, running thru this bundle. Comments, please. - Rob Wolf >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://www.olsusa.com/Users/Mkaye/maillist.html Builders' Bookstore: http://www.buildersbooks.com/lancair Please send your photos and drawings to marvkaye@olsusa.com. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>