Looking at the James web site, I do not believe that it would fit a 360.; it is way too high. If you want a plenum for a 360, contact Chris Zavatson. I have one of his plenums, and it is extremely well made. The fit is really tight to fit inside the cowling, but the result is well worthwhile.
Jerry Fisher
On Sun, May 10, 2009 at 8:13 AM, Bill Bradburry <bbradburry@bellsouth.net> wrote:
From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of Jeremy Fisher
Sent: Saturday, May 09, 2009 5:08 PM
When I checked last year, Lancair was selling the baffle kits, but at a ridiculous price; I think it was around $750. I bought the RV kit and had no major difficulty fitting it, although you have to be prepared to cut a lot of metal away, and to make some very minor modifications around the front of the engine. However it was not difficult, the kit was of excellent quality, and fitted very well. Having said all that, I was using Chris Zavatson's plenum instead of silicone baffles, but I see no reason why you should have any difficulty with them.
I think that I bought the RV7 kit, and it was about $250. Any side by side kit should work though.
I would not personally want to cut the baffles out from scratch, as the fit is quite critical and the shapes are complex; it would be a lot of work.
On Thu, May 7, 2009 at 7:13 PM, Jim Nordin <panelmaker@earthlink.net> wrote:
The blueprints are supposed to be part of the kit. If you didn't get
blueprints as part of your kit, you were shorted. I asked for them and they
sent them straight away.
Jim
-----Original Message-----
From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of
vonjet@gmail.com
Sent: Thursday, May 07, 2009 7:01 AM
To: lml@lancaironline.net
Subject: [LML] Re: Baffle kit for Lancair 360 mkII
Doug,
I do not think Lancair sells the baffle kits anymore. But they sell the
blueprints for 3 bucks a sheet. I bought a copy last year.
Bryan
------Original Message------
From: Doug Baleshta
Sender: Lancair Mailing List
To: lml@lancaironline.net
ReplyTo: Lancair Mailing List
Subject: [LML] Baffle kit for Lancair 360 mkII
Sent: May 6, 2009 10:21 AM
I cannot find a baffle kit on the Lancair parts webpage, search doesn't
bring anything up. I understand some folks have used the RV kit? Any
suggestions and if you've used the RV, which one?
Doug
--
For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html
Sent from my Verizon Wireless BlackBerry
--
For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html
--
For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html
|