Mailing List lml@lancaironline.net Message #51216
From: <vtailjeff@aol.com>
Sender: <marv@lancaironline.net>
Subject: Re: [LML] Re: Landing distance for a IVP ?
Date: Fri, 24 Apr 2009 23:11:22 -0400
To: <lml@lancaironline.net>
Amen!


-----Original Message-----
From: Brent Regan <brent@regandesigns.com>
To: lml@lancaironline.net
Sent: Thu, 23 Apr 2009 7:40 pm
Subject: [LML] Re: Landing distance for a IVP ?

John asks:
<< What do you guys use as far as personal minimums in runway length when landing your IV’s?>>>

Home base for me (6ID1) is 2,200' x 40, 2,720 MSL. Due to terrain, landing is to the east and slightly uphill. Usually there is a 3-5 Kt tail wind. Landings can be accomplished in 1,400 to 1,800 feet under these conditions BUT it requires a LOT of practice. For me it took 500 hours in type and over 1,000 landings before I could consistently nail my intended landing spot at the needed speed (90 Kts).  Also, forget about greasers, these are firm "positive contact" landings that I warn my passengers about.

My first landing in a IV-P was on a 6,000' x 100' field and I needed 5,500' of it.

There are several Lancairs including at least 2 IVs at KPAO which is 2400 feet and at sea level.

As a rule, never land on anything shorter than you have already demonstrated CONSISTENTLY on a longer field.

You can land on short fields the same way you get to Carnegie Hall......... Practice, Practice, Practice.

Regards
Brent Regan



Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster