Mailing List lml@lancaironline.net Message #50985
From: Chuck Jensen <cjensen@dts9000.com>
Sender: <marv@lancaironline.net>
Subject: RE: [LML] Re: Jefco
Date: Fri, 10 Apr 2009 20:21:55 -0400
To: <lml@lancaironline.net>
Good point, Bruce.  In that vein, the 'expiration date' is close to a simple arbitrary number.  In the large volume product we use, the manufacturer gives a 6 month shelf life statement....whether it comes fresh off the production line or has set for 6 month in their warehouse.  A test coupon to check formulation and the viability of the polymer components should be done anytime components have set for a lengthy period of time (more than a few weeks, especial as you approach, or pass, the expiration date).

Chuck Jensen



-----Original Message-----
From: Lancair Mailing List [mailto:lml@lancaironline.net]On Behalf Of
Bruce Gray
Sent: Thursday, April 09, 2009 1:01 PM
To: lml@lancaironline.net
Subject: [LML] Re: Jefco


And how can you verify its environmental integrity before you received
it.

Bruce
WWW.Glasair.org

-----Original Message-----
From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of
vonjet@gmail.com
Sent: Thursday, April 09, 2009 7:53 AM
To: lml@lancaironline.net
Subject: [LML] Re: Jefco

And for those of us in the past 10 years who built planes with Jeffco
that was stored cold or on the floor. Well, good luck and hope your
plane stays together.
Wonderful news to learn of now.  Would have been nice to know this
yesteryear.  


------Original Message------
From: marv@lancair.net
Sender: Lancair Mailing List
To: lml@lancaironline.net
ReplyTo: Lancair Mailing List
Subject: [LML] Jefco
Sent: Apr 8, 2009 5:06 PM

Posted for "Justin Hawkins" <JustinH@lancair.com>:

 All Lancair customers the build shop did a test on the Jefco resin, if
 it gets close to freezing even for only a matter of minutes the resin
 can crystallize and its properties ruined. So if that happens clean the
 pump replace the resin.
 
 The jefco resin in the 5 gallon drums if left on a concrete floor or
 steel floor the resin can pull the cold up into the container and ruin
 the resin. Make sure the resin is stored properly for long use.
 
 
 
 Justin Hawkins
 
 Lancair Airframe & Technical Support
 
 Lancair Int. Inc.
 
 250 SE Timber AVE
 
 Redmond, OR 97756
 
 justinh@lancair.com <mailto:justinh@lancair.com>
 
 541-923-2244 ext 121
 
 
 
 
-- For archives and unsub
http://mail.lancaironline.net:81/lists/lml/List.html

Sent from my Verizon Wireless BlackBerry
--
For archives and unsub
http://mail.lancaironline.net:81/lists/lml/List.html


--
For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster