|
How are you sealing the cowl inlets to the plenum inlets? There seems to be
a gap of 1/8 to 1/4 " around that area??
Bill B
-----Original Message-----
From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of
Greenbacks, UnLtd. (under review)
Sent: Wednesday, March 04, 2009 8:13 AM
To: lml@lancaironline.net
Subject: [LML] Plenum
I have 1/4" clearance between the ring gear and the top cowl and this
distance is sure to increase with age.
Also, there is approx 3/16" clearance between the top of the flow divider
and cowl and approx 1/16" clearance at the top engine mount brace, this area
is temporarily covered with duck tape in the last photo.
|
|