Mailing List lml@lancaironline.net Message #50348
From: John Schroeder <jschroeder@perigee.net>
Sender: <marv@lancaironline.net>
Subject: Re: [LML] Re: cylinder wear-to lean or not too lean
Date: Fri, 06 Feb 2009 19:35:24 -0500
To: <lml@lancaironline.net>
Hi Fred -

I believe you meant to say "below" about 60-65%...

Best,

John


On Thu, 05 Feb 2009 13:43:57 -0500, Fred Moreno <fredmoreno@optusnet.com.au> wrote:

 Above about 60-65% you can set mixture with impunity and do no damage according to his reports.  He does show you can lean at 80% power with this engine, but as I recall it must be 75-80F lean of peak.  I copied his tables and the picture of the red wedge and have them on my clip board in the airplane.



Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster