X-Virus-Scanned: clean according to Sophos on Logan.com
Return-Path: <marv@lancaironline.net>
Sender: <marv@lancaironline.net>
To:  lml@lancaironline.net
Date: Tue, 03 Feb 2009 15:57:22 -0500
Message-ID: <redirect-3474878@logan.com>
X-Original-Return-Path: <kkellner1@new.rr.com>
Received: from hrndva-omtalb.mail.rr.com ([71.74.56.125] verified)
  by logan.com (CommuniGate Pro SMTP 5.2.12)
  with ESMTP id 3474273 for lml@lancaironline.net; Tue, 03 Feb 2009 11:26:50 -0500
Received-SPF: pass
 receiver=logan.com; client-ip=71.74.56.125; envelope-from=kkellner1@new.rr.com
Received: from D4SSJS91 ([65.27.68.13]) by hrndva-omta02.mail.rr.com
          with ESMTP
          id <20090203162612.GRHI4789.hrndva-omta02.mail.rr.com@D4SSJS91>;
          Tue, 3 Feb 2009 16:26:12 +0000
X-Original-Message-ID: <8E58AC66B58443B39ACA1EBD90D1E9FC@D4SSJS91>
From: "Ken" <kkellner1@new.rr.com>
X-Original-To: <lml@lancaironline.net>,
	"Tom Williams" <tfsent@worldnet.att.net>
References: <redirect-3472885@logan.com>
Subject: Re: [LML] Door Seal Test
X-Original-Date: Tue, 3 Feb 2009 10:26:13 -0600
MIME-Version: 1.0
Content-Type: text/plain;
	format=flowed;
	charset="iso-8859-1";
	reply-type=original
Content-Transfer-Encoding: 7bit
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 6.00.2900.5512
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.5579

I love the pics  --  keep up the good work
----- Original Message ----- 
From: "Tom Williams" <tfsent@worldnet.att.net>
To: <lml@lancaironline.net>
Sent: Monday, February 02, 2009 2:16 PM
Subject: RE: [LML] Door Seal Test


WAAAY too many pics!!!  Keep it simple.



-----Original Message-----
From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of Janie
& Ed Smith
Sent: Monday, February 02, 2009 7:12 AM
To: lml@lancaironline.net
Subject: [LML] Door Seal Test

Hi Jeff,

Got the pictures for you on the door seal test, which we are attaching for
your perusal.

Be sure you test the seal with the door closed and latched!  I left our door

open so you could see how things were hooked up.  The adjustment screw for
adjusting the pressure is located on the pressure switch between the two
terminals.  It will take a flat blade screwdriver to adjust the setting.

Our switch was preset at close to 20 psi and we lowered it down to 12 psi.
We haven't pressurized our plane yet, so I can't determine if that pressure
will seal the door.

Good luck,

Ed Smith