WAAAY too many pics!!!  Keep it simple.



-----Original Message-----
From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of Janie
& Ed Smith
Sent: Monday, February 02, 2009 7:12 AM
To: lml@lancaironline.net
Subject: [LML] Door Seal Test

Hi Jeff,

Got the pictures for you on the door seal test, which we are attaching for
your perusal.

Be sure you test the seal with the door closed and latched!  I left our door

open so you could see how things were hooked up.  The adjustment screw for
adjusting the pressure is located on the pressure switch between the two
terminals.  It will take a flat blade screwdriver to adjust the setting.

Our switch was preset at close to 20 psi and we lowered it down to 12 psi.
We haven't pressurized our plane yet, so I can't determine if that pressure
will seal the door.

Good luck,

Ed Smith