|
|
Ed were did you get the 5 circuit contactor shown in the sixth image?
David
Janie & Ed Smith wrote:
Hi Jeff,
Got the pictures for you on the door seal test, which we are attaching for your perusal.
Be sure you test the seal with the door closed and latched! I left our door open so you could see how things were hooked up. The adjustment screw for adjusting the pressure is located on the pressure switch between the two terminals. It will take a flat blade screwdriver to adjust the setting.
Our switch was preset at close to 20 psi and we lowered it down to 12 psi. We haven't pressurized our plane yet, so I can't determine if that pressure will seal the door.
Good luck,
Ed Smith
------------------------------------------------------------------------
------------------------------------------------------------------------
------------------------------------------------------------------------
------------------------------------------------------------------------
------------------------------------------------------------------------
------------------------------------------------------------------------
------------------------------------------------------------------------
------------------------------------------------------------------------
------------------------------------------------------------------------
------------------------------------------------------------------------
------------------------------------------------------------------------
------------------------------------------------------------------------
------------------------------------------------------------------------
--
For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html
|
|