|
|
Hey All;
Hope this answers some questions.
The engine is a Mazda 20B 3-rotor, with a Garrett 4088 turbo, and as you can see, we've fabricated all of the manifolds. Won't know for sure until we dyno the engine next week, but we anticipate a conservative 450+ hp at take-off, and to be turbo-normalized to 20,000 ft. +. Initially we will be using a Catto 76" (130 deg. pitch) fixed pitch prop configured for cruise at around 250+ knots. Cooling will go into a custom belly scoop we have fabricated, along with the oil cooler, all with adjustable cowl flaps. Benefits are 4 total moving parts, excellent weight to power ratio, dual spark plugs, dual fuel injectors, (one each runner), dual oil system with oversize cooler and pan. Costs on the engine thus far have come in around $15,000, and we anticipate around 1000+ hours TBO, hopefully, as we are only running the engine at about 50% of it's max potential horsepower, and it runs on pump gas or 100LL, the computer doesn't care which......(:-). We are using a RWS redrive at 2.85:1 reduction, and Tracy's EC3 computer to make it all go. We anticipate a few bugs, but for the most part it seems pretty solid, we'll see.
Greg Ward
Lancair Legacy 20B N178RG in progress
----- Original Message ----- From: "Ron Laughlin" <ronlaughlin@gmail.com>
To: <lml@lancaironline.net>
Sent: Sunday, January 25, 2009 8:23 AM
Subject: [LML] Re: Alternative Power Plants
Cool but is there going to be enough room for a radiator?
RonL
On Jan 24, 2009, at 10:04 AM, "Greg Ward" <gregw@onestopdesign.biz> wrote:
Couple of shots of our engine ready to dyno. Going into our Legacy N178RG.
Greg Ward
Lancair 20B in progress
<P1000873 (Medium).JPG>
<P1000871 (Medium).JPG>
--
For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html
--
For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html
|
|