Sender: <marv@lancaironline.net>
To:  lml@lancaironline.net
Date: Sat, 24 Jan 2009 11:04:59 -0500
Message-ID: <redirect-3450462@logan.com>
Received-SPF: none
 receiver=logan.com; client-ip=206.210.66.138; envelope-from=rpastusek@htii.com
From: "Robert Pastusek" <rpastusek@htii.com>
References: <list-3441068@logan.com>
In-Reply-To: <list-3441068@logan.com>
Subject: RE: [LML] Balancing MKII Elevators
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: 7bit
Thread-Index: Acl9rI7GtPU88vshStOxFsWkqEJnsgACZHPw
Content-Language: en-us

Bryan,
Some have used a counter-weighted arm that bolts to the center operating
bellcrank on the IV/IV-P. Don't know if this would work in your situation,
but it's an easy way to do this if it will

Bob Pastusek

-----Original Message-----
From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of Bryan
Wullner
Sent: Friday, January 23, 2009 5:47 PM
To: lml@lancaironline.net
Subject: [LML] Balancing MKII Elevators

My Left Elevator has the weight in the counterbalance and because of
the trim tab and servo Its out of balance.  Im not sure how I can
balance it.  Its gonna take more than 1 lb.  If I attach both
elevators together at the bellcrank I might be able to get the two
balanced easier together as one unit.  But as far as balancing the
left one alone I'm not sure if I can do it.   Right one is fine.
Any ideas, suggestions?

Bryan

--
For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html