Sender: <marv@lancaironline.net>
To:  lml@lancaironline.net
Date: Wed, 03 Dec 2008 21:15:58 -0500
Message-ID: <redirect-3329767@logan.com>
Received-SPF: none
 receiver=logan.com; client-ip=69.128.73.170; envelope-from=sbuller@emmett.org
Content-class: urn:content-classes:message
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Subject: RE: [LML] IV Elevator ends
In-Reply-To: <list-3325954@logan.com>
Thread-Topic: [LML] IV Elevator ends
Thread-Index: AclUC33wrv9HKLCaTbOlbVbXXZ7x2gAh5f2Q
From: "Steve Buller" <sbuller@emmett.org>

Bill'
My 1998 kit, bought in 2007 has no upswept ends. I've seen several
IVs... Have never noticed any upsweep on elevator ends??? Sorry
Steve Buller, 650 Hrs in=20

-----Original Message-----
From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of
Bill Wade
Sent: Monday, December 01, 2008 6:21 PM
To: lml@lancaironline.net
Subject: [LML] IV Elevator ends

 This picture shows the end of the LH elevator- it's sanded down to the
skin but has a pronounced upsweep, about 1/4" at the highest point. The
RH is very similar. Lancair told me this is intended to act as an air
dam to keep air from spilling off the end, however they also said it
could be flattened out if I wanted. Since the stablilizer tips are flat
it takes a fair amount of micro to match the profile.

  I haven't seen many IV's in person and didn't know enough to look for
this item. The ones I have pictures of appear to be flat at the ends. Is
this something new? Has anyone built angled tips? I'd appreciate a photo
if
possible-  Thanks-  Bill Wade=20