Eric
That's what I had in my Lancair 235/290 with no header tank and that's what
is in my Lancair IV. I understand that they recommend 3/8 vent line on the
Lancair IV, now but we have not had a problem in flowing 43 Gals per hour
on takeoff with the 1/4 inch line.
Tom Byrnes Lancair IV N54TB
In a message dated 11/24/2008 11:01:34 P.M. Eastern Standard Time,
cassutt@windstream.net writes:
I am not
using the header tank in my 360 and have installed 1/4" od tubing as the vent
for each wing tank. My old SB manual says nothing about fuel vent size even
with the header and what published updates there are for the extended bay
don't have a size listed either. Is this big enough dia. for pulling
fuel straight from the wings or should it be larger? What have others
done.
Eric Demaray
360 SB
--
For archives and unsub
http://mail.lancaironline.net:81/lists/lml/List.html