X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Sender: To: lml@lancaironline.net Date: Sun, 17 Aug 2008 12:12:22 -0400 Message-ID: X-Original-Return-Path: Received: from elasmtp-banded.atl.sa.earthlink.net ([209.86.89.70] verified) by logan.com (CommuniGate Pro SMTP 5.2.6) with ESMTP id 3078652 for lml@lancaironline.net; Fri, 15 Aug 2008 17:18:44 -0400 Received-SPF: none receiver=logan.com; client-ip=209.86.89.70; envelope-from=rpharis@teamimc.com Received: from [71.121.17.128] (helo=ws1) by elasmtp-banded.atl.sa.earthlink.net with esmtpa (Exim 4.67) (envelope-from ) id 1KU6gL-0007ik-34 for lml@lancaironline.net; Fri, 15 Aug 2008 17:18:01 -0400 Reply-To: From: "Rod Pharis" X-Original-To: "'Lancair Mailing List'" Subject: RE: [LML] leaking wing on IVP X-Original-Date: Fri, 15 Aug 2008 14:17:38 -0700 X-Original-Message-ID: <003d01c8ff1c$58cd0ee0$2101a8c0@ws1> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_003E_01C8FEE1.AC7080D0" X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2910.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1914 Importance: Normal In-Reply-To: X-ELNK-Trace: 1293b74446918d85d780f4a490ca6956abb457f1b4332f52e2a943ac5c5aa3fa6a7654f9356be10d350badd9bab72f9c350badd9bab72f9c350badd9bab72f9c X-Originating-IP: 71.121.17.128 This is a multi-part message in MIME format. ------=_NextPart_000_003E_01C8FEE1.AC7080D0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Ralf, In my opinion, the best method would be to have Lancair remove the wing top skins with heat guns, reseal and reassemble the wings correctly. They may have to replace the top skins. I saw them doing that for someone else a couple of years ago. Rod -----Original Message----- From: Lancair Mailing List [mailto:lml@lancaironline.net]On Behalf Of bronnenmeier@GROBSYSTEMS.COM Sent: Friday, August 15, 2008 1:26 PM To: lml@lancaironline.net Subject: [LML] leaking wing on IVP Dear subscribers, I need some help/advise. I purchased a used IVP with 250 hrs. It did not look very nicely and I knew that it needed some work. I had a pre purchase inspection/anual done at Lancair and they confirmed that everything was in a working condition and that the airplane was safe to fly. Based on this I made my purchase decision. I took the airplane apart and I am rebuilding it right now (I did not have the money for a new kit). After painting the wings we got a paint bubble during the buffing in the sun. I dug into bubble and found some of that brown rubber under the primer (the sealer that is used to seal the inside of fuel tanks - unfortunately I decided to just grind of the original paint and leave the primer on) I decided to grind of all the paint and primer around my leading edge and found that brown rubber stuff on several spots along the leading edge. After removing the rubber I found wet spots in the carbon fiber. After looking at the wing closer I found blue stains on the very outside of the leading edge (visible by looking into the wing after removing the winglets). This probably should have been found by Lancair during the annual/pre purchase inspection. I think my whole leading edge is soaked with fuel since I see stains where no fuel tank is. I would also consider this as a safety concern. My friends from the FBO here think the design of a wing without any inspection panels is hazardous anyway. So I won't find much help there. One professional Lancair builder recommended to paint the outside of the wing with sealer paint - I don't feel very comfortable with his advice. Can anyone give me advise on how to fix this right. I would also feel more comfortable if I would have professional help on this - any advise on this? Do you think I would have any success asking Lancair for help on this since I purchased the plane based on their evaluation. Ralf Bronnenmeier Bluffton, OH 45817 Phone: (419) 369 12 33 E-mail: bronnenmeier@grobsystems.com ------=_NextPart_000_003E_01C8FEE1.AC7080D0 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable
Ralf,
 
In my=20 opinion, the best method would be to have Lancair remove the wing = top skins=20 with heat guns, reseal and reassemble the wings correctly.  = They may=20 have to replace the top skins.  I saw them doing that for someone = else a=20 couple of years ago.
 
Rod
-----Original Message-----
From: Lancair Mailing = List=20 [mailto:lml@lancaironline.net]On Behalf Of=20 bronnenmeier@GROBSYSTEMS.COM
Sent: Friday, August 15, = 2008 1:26=20 PM
To: lml@lancaironline.net
Subject: [LML] = leaking wing=20 on IVP

Dear=20 subscribers,

 

I need some help/advise. = I=20 purchased a used IVP with 250 hrs. It did not look very nicely and I = knew that=20 it needed some work. I had a pre purchase inspection/anual done at = Lancair and=20 they confirmed that everything was in a working condition and that the = airplane was safe to fly. Based on this I made my purchase=20 decision.

 

I took the airplane = apart and I am=20 rebuilding it right now (I did not have the money for a new kit). = After=20 painting the wings we got a paint bubble during the buffing in the = sun. I dug=20 into bubble and found some of that brown rubber under the primer (the = sealer=20 that is used to seal the inside of fuel tanks - unfortunately I = decided to=20 just grind of the original paint and leave the primer on) I decided to = grind=20 of all the paint and primer around my leading edge and found that = brown rubber=20 stuff on several spots along the leading edge. After removing the = rubber I=20 found wet spots in the carbon fiber. After looking at the wing closer = I found=20 blue stains on the very outside of the leading edge (visible by = looking into=20 the wing after removing the winglets). This probably should have been = found by=20 Lancair during the annual/pre purchase=20 inspection.

 

I think my whole leading = edge is=20 soaked with fuel since I see stains where no fuel tank is. I would = also=20 consider this as a safety concern. My friends from the FBO here think = the=20 design of a wing without any inspection panels is hazardous anyway. So = I won’t=20 find much help there. One professional Lancair builder recommended to = paint=20 the outside of the wing with sealer paint – I don’t feel = very comfortable with=20 his advice.

 

Can anyone give me = advise on how=20 to fix this right. I would also feel more comfortable if I would have=20 professional help on this – any advise on this? Do you think I = would have any=20 success asking Lancair for help on this since I purchased the plane = based on=20 their evaluation.

 

 

Ralf=20 Bronnenmeier

Bluffton, OH=20 45817

Phone: (419) 369 12=20 33

E-mail:=20 bronnenmeier@grobsystems.com

 

------=_NextPart_000_003E_01C8FEE1.AC7080D0--