|
|
Terence,
You will not find a finer propeller anywhere than the MT.
Call Eric Greinld at MT.
He may have a reconditioned MTV-18-C/170 that you could get for a good price.
Tell him I sent you...
His email is eric.greindl@mt-propeller.com
They are out for another week for vacation.
Best,
Randy Snarr
--- On Mon, 8/11/08, donaldgordon@bellsouth.net <donaldgordon@bellsouth.net> wrote:
From: donaldgordon@bellsouth.net <donaldgordon@bellsouth.net>
Subject: [LML] Re: LNC2, O-320-E3D prop selection
To: lml@lancaironline.net
Date: Monday, August 11, 2008, 12:26 PM
Terrance,
I have installed an electric, MT constant speed propeller. It is an
MTV-18-C/170-119d model. I am
very pleased with the performance of the
propeller. I have plenty of ground clearance and the propeller was
relatively easy to install. I'm not sure what configuration/planform
information you a specifically looking for but it is a 3-blade propeller
with 67" diameter blades. The unit weights 42 lbs including spinner and
control unit. I'm not sure what tip thickness you want (chord width or
actual thickness), but I'll measure it for you when I'm at the hangar
this
weekend. I'll also snap a photo and send it to you as well.
Don Gordon
N320DS - LNC2
Orlando, FL
1300 Hours
-----Original Message-----
From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of
terrence o'neill
Sent: Saturday, August 09, 2008 3:35 PM
To: lml@lancaironline.net
Subject: [LML] Re: LNC2, O-320-E3D prop selection
hi Don,
I am choosing a prop and found your post from last November. I
have a
235/320 presently with a 64" wood prop... and am looking at the elecctric
MTV-18-C/170-57. I have an O-320 B2b which I converted to injection.
Couldn't find this prop at OSH, and wondered if yours was one, and if you
might have a e-photo of it I could look at... especially the blade
configuration/planform... and the blade thickness at the tip? Terrence.
L235/320 N211AL
From: <dskeele@bellsouth.net>
To: "Lancair Mailing List" <lml@lancaironline.net>
Sent: Wednesday, November 01, 2006 09:05 AM
Subject: [LML] Re: LNC2, O-320-E3D prop selection
> Tim,
> I also have a MT 3 blade electric prop. My O-320 B1B narow deck would not
> accomodate a hydraulic actuator.. am satisfied with their performance.
> Don Skeele A&P N320J
>>
--
For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html
--
For
archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html
|
|
|