|
|
Tom,
Sorry but I do not have a spare rear spinner bulkhead. I just received mine
after about an 8-week wait. My L360 was completed last year and flew in
primer for 6 months. I am now completely disassembled for paint (almost
done) and have installed a new two-blade Hartzell propeller and spinner.
I have figured out how to install the spinner with no visible screws around
the aft end and I have designed and started to build a forward support that
will have no visible screws also. (No, the method is not clecoes or the
boy.) I am wondering if you would share with me what tips you have found in
your search on how to do a forward bulkhead which I might incorporate into
my design.
I will share with you and the LML if you or anyone is interested in what I
did to accomplish the no-screw installation. Just call or send me an email.
Randy Hartman
L360 N360DE - 110 hrs.
(319) 360-9775
randy@aoaircrafters.com
-----Original Message-----
From: Tom McNerney [mailto:dudewanarace@yahoo.com]
Sent: Friday, June 27, 2008 6:31 PM
To: lml@lancaironline.net
Subject: L360 Spinner Bulkhead Needed
After finding some paint chipping off my spinner, I did a little more
investigation and found that my spinner bulkhead was cracked in 2 places.
Some previous owner had built the forward bulkhead that supports the inside
tip of the spinner, but over the years It has begun to fail as well. I did
a search and found some great tips on how to build a new forward bulkhead so
i'll get started on that. But... The rear spinner bulkhead is on back
order with lancair for 6 more weeks. Just shooting in the dark here and
seeing if anyone has one available for sale. Part # SP-BKPT-1-A
Thanks for your help in advance!
L360
Tom McNerney
816-309-6038
dudewanarace@yahoo.com
|
|