Sender: <marv@lancaironline.net>
To: lml@lancaironline.net
Date: Mon, 12 May 2008 16:41:06 -0400
Message-ID: <redirect-2919184@logan.com>
Received-SPF: none
 receiver=logan.com; client-ip=209.86.89.67; envelope-from=artbertolina@earthlink.net
DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws;
  s=dk20050327; d=earthlink.net;
  b=rOMRfaqAQ82erApJfq3BjFMV2yicXfOSs8TWvchhRPd25HtsyskcwgVIeTkbHLii;
  h=Received:Message-ID:From:To:References:Subject:Date:MIME-Version:Content-Type:Content-Transfer-Encoding:X-Priority:X-MSMail-Priority:X-Mailer:X-MIMEOLE:X-ELNK-Trace:X-Originating-IP;
From: "Art Bertolina" <artbertolina@earthlink.net>
References: <list-2916176@logan.com>
Subject: Re: [LML] Spar bolts
MIME-Version: 1.0
Content-Type: text/plain;
	format=flowed;
	charset="iso-8859-1";
	reply-type=response
Content-Transfer-Encoding: 7bit

Steve
make a new bushing with the hole drilled off center
Art
----- Original Message ----- 
From: "steve crocker" <steve.crocker@earthlink.net>
To: <lml@lancaironline.net>
Sent: Saturday, May 10, 2008 5:12 AM
Subject: [LML] Spar bolts


> Hi All:
>
> I have an old, old IV kit, and unfortunately  I have  mismatched  wings. 
> the wing attach bolts  fit  except  for one ,  and it is off  center by a 
> few thousandth.
> Any ideas out there on how to fix it.  My thought was to press out the 
> bushing  at the tip of the spar, apply flox and redrill  the hole and 
> press the bushing
> back in.  Any advice would be greatly appreciated
>
> steve crocker.
>
> --
> For archives and unsub 
> http://mail.lancaironline.net:81/lists/lml/List.html
>