|
Jay Sabot,
I had the same problem a while back and the solution I came up
with was simple and worked well. Assuming you have the red brake fluid
reservoir that comes with the kit you can generate a hole large enough for the
ignition wire connector directly behind the reservoir and a small wire-size slot
to the bottom of the reservoir. Actually I made a rectangular opening just
big enough for the connector, pulled the wire through the opening, and
reinstalled the reservoir with a dab of RTV at the bottom where the wire goes
through. The RTV seals the opening and keeps the wire from chafing.
Worked for me.
Leighton Mangels
|