Dennis,
I just went to the
Lancair web site and checked the Service Bulletins. There is none there
concerning the Ram Air system. Where did you get a SB?
When I reported the
problem to Tim in Mid July he said a bulletin would be forthcoming. I also
discussed it with him at Oshkosh. (Granted, he was somewhat distracted
with the Evolution rollout). I have yet to see anything from
Lancair.
Paul
Bricker
LNCE
N63PB
From:
Lancair Mailing List
[mailto:lml@lancaironline.net] On Behalf Of
Dennis Johnson
Sent: Friday, August 31, 2007 10:28
AM
To:
lml@lancaironline.net
Subject: [LML] Loose
Screws
I spent yesterday afternoon at the hangar, probably
the hottest day of the year, sweating and doing the ram air butterfly valve
loose screw service bulletin. Sure enough, one screw was finger
tight. The other screw was Allen wrench tight.
Thanks to the LML and a special thanks to Erik.
When this issue first arose, I implemented the same "check it often with a
mirror and flashlight" procedure as Erik, hoping that would be
sufficient. Erik's report on the LML about how quickly the screw backs
out, combined with Lancair publishing the SB, scared me into checking it and
I'm so glad I did! Thanks!
Legacy N52PT 75 hours tach
time