Mailing List lml@lancaironline.net Message #43787
From: Jim Scales <joscales98@hotmail.com>
Sender: <marv@lancaironline.net>
Subject: Re: [LML] Re: ES Strut issues
Date: Sun, 26 Aug 2007 18:00:10 -0400
To: <lml@lancaironline.net>
How does the stick behave when the shake occurs?
 
Jim
----- Original Message -----
Sent: Sunday, August 26, 2007 1:03 PM
Subject: [LML] Re: ES Strut issues

Jim,
   My shimmy symptoms sound identical to yours - same onset speed, same results from releasing and smoothly re-applying brakes.  To me, my butt says the shaking is coming from the nose, but I know from my first experience when I had a witness that the origin may be from one or both of the mains, which seems to translate forward. 
   Like Mike Easley, I'll hold aft stick as I roll out to keep as much weight as possible off the mains during rollout.  I also retract the flaps as soon as I'm on the ground to put more weight on the mains.  I think that also takes a bit of weight off the nose. I haven't really taken notice of the effect of a more aft CG on the shaking, but I'll pay more attention to that in the future.
   If I have a short runway (like the 2000' one we use for our Young Eagles events), I land on-speed and do heavier braking as soon as I'm on the ground, which gives me a lot of deceleration before the shimmy onset.  That results in a much shorter landing rollout.
   I don't have a taxi speed that I avoid, though I can get a shaking if I try to brake lightly at low taxi speeds.  I don't get any shimmy at all when taxiing with the brakes off. 
   The surprising thing to me is what a well known issue this is and the lack of a solution for it.  You'd think that between some of the engineering types who are flying ES's and the factory guys, someone would have put their finger on exactly what causes this and come up with a fix.  I think Lancair has chosen to bury their heads in the sand on this other than to equip the new kits with a beefier nose strut.  But there are a lot of old struts flying out there and at least three of them that I know of have had catastrophic failure, two resulting in collapsed nose gears, broken mounts and $50K+ in damage.  In the other case, it was a miracle that the strut didn't fold, as the post flight tear down of the strut revealed a total failure of one of the damping O rings.
   Maybe your video tests will point us in the right direction.  I sure hope so!
   Skip 
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster