Return-Path: Received: from lsmls02.we.mediaone.net ([24.130.1.15]) by truman.olsusa.com (Post.Office MTA v3.5.1 release 219 ID# 0-64832U3500L350S0V35) with ESMTP id com for ; Tue, 11 Jan 2000 23:59:36 -0500 Received: from mediaone.net (we-24-30-109-10.we.mediaone.net [24.30.109.10]) by lsmls02.we.mediaone.net (8.8.7/8.8.7) with ESMTP id VAA28841; Tue, 11 Jan 2000 21:04:28 -0800 (PST) From: freemen@mediaone.net Message-ID: <387C09B6.9A97C856@mediaone.net> Date: Tue, 11 Jan 2000 20:57:26 -0800 To: BOBPAS26@aol.com CC: lancair.list@olsusa.com Subject: Re: IV-P Servo-Actuated Oil Cooler Door References: <7a.7a680bce.25ace11f@aol.com> X-Mailing-List: lancair.list@olsusa.com Mime-Version: 1.0 <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> BOBPAS26@aol.com wrote: Marv, Was wondering if anyone has substituted a Mac servo or similar device for the cable-actuated oil cooler door/flap on the TSIO 550. My rationale was to eliminate a cable through the pressure bulkhead/firewall and perhaps(?) save a bit of weight. Comments/thoughts appreciated. Have just completed and tested a rotating "spit" for our fast-build f Could try to send a digital photo if there is any interest. Bob Pastusek Send the digital photo! Brent Sanchez >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://www.olsusa.com/Users/Mkaye/maillist.html Builders' Bookstore: http://www.buildersbooks.com/lancair Please send your photos and drawings to marvkaye@olsusa.com. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>