<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
Hi all.

Please help!

With the A/C inverted and level my left fslg fillet is 3/4" higher than the
right one, when measured at the T.E were it will meet the flap T.E.
The line at BL50 and wingtip is 100%  level fwd and aft, left and right.

When installing the belly pan (2 years ago) I noticed that the 4 foam blocks
didn't end up with the same thickness when everything was level. A mail to
Orin came back with the answer:" Don't worry , the thickness of the foam
blocks is not important, keep on building".

I am ready to start working on the flap and aileron, but I cant make a flap
with a "twist"!

Have any of you had this problem, and maybe a "simple" solution for it.

(My wife's solution: " Pour gasoline over that damned thing, throw in a
cigarette and contact the insurance company")

Regards ,
Roy Valvik
360 MKII FB
NORWAY



>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>