Posted for "Jeremy Roach" <JeremyR@lancairavionics.com>:

11922 Ps Engineering PM1000II 4-Place panel mount with Pilot isolate
(jack kit included)
430-6090-100 Garmin SL70 Transponder mode C
430-6050-605 Garmin GX60 Nav
MD40-66 Mid-Continent Course Deviation Indicator T/F basic CDI
SSD TRANSCAL Mode C Encoder
AUTOPILOT
DIGIFLIGHT II TRUTRAK Digital Autopilot Programmer Only 2 basic servo
system, track selector, GPS Nav Mode,Alt Hold
FLIGHT INST.
5934PD3-A615 UNITED INSTRUMENTS Altimeter 20K (un-lit)
7040-C181 UNITED INSTRUMENTS Vertical Speed Indicator (un-lit)
1394T100-7Z MID-CONTINENT Turn Coordinator (un-lit) 3 1/8
8130-B756 UNITED INSTRUMENTS True Airspeed Indicator 260K (Unlit)
(320/360) 3 1/8
23-501-06-16 SIGMA-TEK Attitude Gyro (unlit) (5000B-36) Vacuum
4000B-?? SIGMA-TEK Directional Gyro non lit (vacuum)
PG2C-12 SIRS Panel Mount Compass 14V
ENGINE INST.
E4000 EIS Model 4000 instrument only (customer to purchase probes and
sensors separately)
VP15-01 Grandrapids Vaccuum/Pressure 15 PSI sensor
ACCESSORIES
AK450 AMERI-KING ELT, FAA TSO C91a, EMERGENCY LOCATER TRANSMITTER(not
included but cut out to accomodate)
W31-X2M1G-???5,10,15,20,35,40,50 CIRCUIT BREAKER/ TOGGLE SWITCH
Potter & Brunfield 5,10,15,20,25,30,35,40,50 amp
MJTV-3 Switch, Door Seal Pneumatic Control
MS35059-27 LANCAIR Flaps Switch, Heavy Duty Toggle
MS35058-21 Heavy Duty Toggle Switch SPDT on off on
901-NAP1612 & 901-NAP7683 Aux Ports non Lighted Bezel and Plug
non Lit
782-3212 LANCAIR 10-Circuit Fuse Block fuses included
RP2 RAY ALLEN Indicator Needle Indicator only
A-510-2 Key Switch acs
19051253 LANCAIR Red LED 14v
INCIDENTALS
LASER LANCAIR Laser Cut Aluminum
POWDER LANCAIR Powder-Coat Aluminum

PAINT/ MATERIAL/BODYWORK Paint and Body Work of Fiberglass Panel
and Legacy Pedestal
SILKSCREEN LABEL LANCAIR Custom Silkscreen Labeling

This is a prewired panel for a Legacy FG. The Attitude Gyro and
Directional gyro probably need to be overhauled (it's been sitting a
long time). Everything else seems to work fine. This was the Legacy show
panel we used for Osh Kosh and Sun-N-Fun but now it is being replaced
with a G900X. The autopilot is wired into this panel and hole is cut but
the actual guage is not included. The GPS antenna is mounted behind the
panel for show and tell mainly. It should be relocated outside the
aircraft. If someone out there is in need of a simple but functional
panel this is the one for you. I'll let this guy go for $18,500.00 which
is extremely low for a panel this well built.

Jeremy M. Roach
Avionics Technical Advisor/ Trainer
Lancair Avionics
2244 Airport Way
Redmond Oregon 97756
Tel. (541) 923-2244
Fax. (541) 923-2255
E-mail: jeremyr@lancairavionics.com
<blocked::mailto:jeremyr@lancairavionics.com>