|
Re: [LML] Re: oil filters - 21st century preferred
Photos from the install attached. We had the ADC oil
screen right up against the LightSpeed control boxes which were later
moved inside the cabin. You can see that our placement was modified as we
went along and it got a bit crowded with the air condition hoses and the
pressurization valve (also later changed) etc. . Stop by the Kelly
Aerospace booth and I'll uncowl the engine for your inspection of the current
layout.
Robert M. Simon
ES-P N301ES
From: John Schroeder
[mailto:jschroeder@perigee.net]
Sent: Fri 7/6/2007 1:32
PM
To: lml@lancaironline.net
Subject: Re: [LML] Re: oil
filters - 21st century preferred
Robert -
Would you have some pictures of this
installation to post?
Thanks,
John Schroeder
On Fri, 06
Jul 2007 13:04:09 -0400, Lancair <lancair-esp@ustek.com>
wrote:
> Colyn,
>I installed the ADC oil screen and have been
very pleased with it. (See
> http://www.aircraftspruce.com/catalog/eppages/adcsystem.php
). 100% of
> the trapped particles are right there on the surface
and could be seen
> at a glance. It traps particles far finer
than a paper filter.
> By-pass triggers an indicator lamp and there is
provision for a chip
> detector as well. And cleaning is a
snap.
>Robert M. Simon
> ES-P
N301ES
|